Logitek-electronic-systems JetStream Audio Networking Platform Manuel d'utilisateur télécharger pdf (Page 24)

 See Appendix C for connector pinouts.

JSM-MICIN-RJ Analog Input Card

The JSM-MICIN-RJ card provides 4 microphone pre-amplified inputs using RJ-45 connectors,

following the StudioHub+ wiring standard. Trim pots to the left of the slot provide precise level

adjustment. The top LED will blink like a meter when audio is present and the bottom LED will turn

on when Phantom Power is turned on.

TIP: The trim pots must be used for gain changes of more than 4 dB to preserve the

signal to noise ratio!

 See Appendix C for connector pinouts.

JSM-MICIN-DB Analog Input Card

The JSM-MICIN-DB card provides 8 microphone pre-amplified inputs using DB-25 connectors,

following the StudioHub+ wiring standard. Trim pots to the left of the slot provide precise level

adjustment. LED lamps above the connector will flash as a meter to show audio presence.

TIP: The trim pots must be used for gain changes of more than 4 dB to preserve the

signal to noise ratio!

 See Appendix C for connector pinouts.

JSM-DIN-RJ Digital Input Card

The JSM-DIN-RJ card provides 4 AES/EBU or S/PDIF digital inputs using RJ-45 connectors, following

the StudioHub+ wiring standard. The reference level may only be set using AE Config software. The

top LED will blink like a meter when audio is modulating; the bottom LED will turn on solid when a

valid digital signal is present.

 See Appendix C for connector pinouts.

JSM-DIN-DB Digital Input Card

The JSM-DIN-DB card provides 8 AES/EBU or S/PDIF digital inputs using a DB-25 connector. The

reference level may only be set using AE Config software. LED lamps above the connector will flash

as a meter to show audio presence.

 See Appendix C for connector pinouts.

Logitek JetStream MINI Reference Manual

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 54 55

Pas de commentaire

Logitek-electronic-systems JetStream Audio Networking Platform Manuel d'utilisateur Page 24